PVC Mașini
ACK 420 S
ACK 420 S is designed for the strait or angular cutting operations of the large size of profiles made of PVC and aluminium materials by means of Ø 420 mm of saw blade.
ACK 700
ACK 700 is designed for the strait or angular cutting operations of the large size of profiles made of PVC and aluminium materials by means of Ø 700 mm of saw blade.
CA 601
CA 601 Single Corner Cleaning Machine used to clean lower and upper surfaces and outer corners of PVC profiles welded at 90° angle
CA 603
CA 603 Single Corner Cleaning Machine is used for striping of bottom and top surfaces and cleaning outer corners of 90° PVC cleaning profiles
CCL 1661
CNC controlled four corner PVC welding and cleaning line that provides movement in 2 and 4 axes. After welding process at DK 540, the frame goes to the Cooling Unit (SA 251) automatically. Then the Robot Unit (SA 261) automatically takes the frames from the Cooling Unit (SA 251) where the cleaning process starts and carries it by turning to the CNC 609 or 611 Cleaning Machine
CDC 600
CDC 600 is a fully automatic machine designed to cut large size of PVC and aluminium profiles, straight or at an angle with a double-head Ø 600 mm saw. It offers optimum cutting capacity in different cutting variations thanks to the large diameter saw and the pivoting & tilting mechanism cutting from underneath. Left cutting unit is fixed and mobile right cutting unit goes to measure automatically. It provides a great advantage to the user by making cuts at special angles without making calculations in cutting to point to point operations.
CNC 609
Corner Cleaning Machines are designed for the cleaning of welding chips of PVC profiles that is welded at angle of 90° CNC 609: 2 x servo drive motors, CNC 611: 4 x servo motor drives
CNC 611
Corner Cleaning Machines are designed for the cleaning of welding chips of PVC profiles that is welded at angle of 90° CNC 609: 2 x servo drive motors, CNC 611: 4 x servo motor drives
CRM 201 S
It is used for the processing of slots for locks, drilling handles, triple, hinges, espagnolette holes and opening water drain slot on PVC and aluminium profiles CRM 201S Template copy router with triple holes and water slot drilling features.
CRM 250 S
It is designed to operate quickly and precisely lock’s holes on aluminium and PVC profiles, without releasing the workpiece in one cycle. It is also used for the drilling handles, hinges, espagnolette holes and opening water drain slot on PVC and aluminium profiles
DC 421 PSD
DC 421 PSD is a fully automatic sawing machine that is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 420 mm of saw blades
DC 550 PB
DC 550 PB is full automatic sawing machines that is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 550 mm of saw blades.
DC 550 SKH
DC 550 SKH is full automatic sawing machines that is designed for the straight or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 550 mm of saw blades.
DK 502
Machine is ideal for welding process of PVC plastic profiles at two corners.
DK 540
Machine is ideal for welding process of PVC plastic profiles at four corners.
DKN 302-602
Manual positioning conveyor having digital screen which helps to cut the profiles precisely in the required measurements
FR 222
It is used for the processing of slots for locks, drilling handles, hinges, espagnolette and barrel holes and opening water drain slot on PVC and aluminium profiles up to 3 mm and 2 mm of thickness respectively
FR 223
It is used for the processing of slots for locks, drilling handles, hinges, espagnolette and barrel holes and opening water drain slot on PVC and aluminum profiles up to 3 mm of thickness.
FR 226 S
It is used for the processing of slots for locks, drilling handles, hinges, espagnolette an barrel holes and opening water drain slot on PVC and aluminium profiles up to 3 mm of thickness.
GAS 301
GPT 1000
It is used for the purpose of transporting and storing the assembled window frames and sashes
GT 1000
It is used to keep the gasket rollers to be inserted to window sash profiles firmly
HP 1000
It is used to transport and store cut door and window profiles between workstations
KD 305 -Portable Miter Saw Machine
KD 305 portable miter saw machine is designed for straight and angular cutting of PVC, aluminium and wooden profiles.
KD 350 D
KD 350D Miter saw cutting machines are designed for straight and angular cutting of PVC, aluminium and wooden profiles
KD 350 M
KD 350 M Miter saw cutting machines are designed for straight and angular cutting of PVC, aluminium and wooden profiles.
KD 400 D
KD 400D and KD 400P Miter saw cutting machines are designed for straight and angular cutting of PVC, aluminium and wooden profiles.
KD 400 M
KD 400 M Mitre saw cutting machine is designed for straight and angular cutting of PVC, aluminium and wooden profiles.
KM 211 S
Machine which works manually, ideal for end milling operations on aluminium profiles precisely
KM 212
Portable machine which works manually, ideal for end milling operations on PVC and aluminium profiles precisely.
KM 215 S
Machine which works with hydro-pneumatic system, ideal for the end milling operations on PVC and aluminium profiles precisely
KY 305
KY 305 portable miter saw machine is designed for straight and angular cutting of PVC, aluminum and wooden profiles.
MCA 801
It positions the special metal wedge connectors used in PVC mullion profiles of different series and sizes and automatically screws on both surfaces at once, without requiring adjustment
MK 420
MK 420 , MK 420 PS and MK 450 are manual cutting machines designed for straight and graduated cutting of PVC, aluminium, brass, wood and non-ferrous materials and offered to the user at a very nominal price.
MKN Serisi ( 150-300-301)
It is manual positioning conveyors which help to cut the profiles in required measurements. There are different size of models named MKN 150-300-301-302
NSM 352-NSM 353 -Sash Assembly Station
Ideal for serial, qualified and standard installation of all single and double opening accessories used on different series with various size of sash profiles without needing meter, pencil, fixture and template -NSM 352 - NSM 353 - NSM 353U only for PVC Sash Assembly -NSM 352A only for Aluminyum Sash Assembly -NSM 353A for both Aluminium and PVC Sash Assembly
PC 4000 -Profile Carry Cart
PIM 6508 SE
PIM 6508 SE is 8-axis CNC controlled machining center which is specifically designed to process any kind of PVC profiles in the market. The machine can do all operations on four sides of PVC profiles such as milling, opening key holes, water slots, hinge holes, handle holes, marking, saw blade cutting etc. PIM 6508 SE has the programming feature which provides minimum waste and maximum amount of production. 5 pieces of PVC profiles can be placed on the feeding conveyor of the machine and 3-axis pneumatic gripper moves them into the milling & cutting center for the milling and cutting operations. The cutting unit can serially cut profiles at the desired angle between 45°-135°.Operator attaches barcodes on the processed profiles to make them ready for welding operation.
PT 1000
It is used for the purpose of transporting and storing the assembled window frames and sashes
PT 2000
It is a two-sided trolley which is used for the purpose of transporting and storing the assembled window frames and sashes
PWB 4100
It is a pneumatic work bench used in the assembly of doors, windows, frames and sash profiles and glasses with two angled and width-adjustable work platforms
RS 1000
It is designed to support the profiles processed in the machines
RT 1000
RYK 420 S
RYK 420 S Radial Saw Machine is designed for the strait or angular cutting operations of the large size of materials made of aluminium, brass and non-ferrous metals RYK 420 S allows straight and angular cuttings thanks to the pivoting and tilting head
RYK 420 W
RYK 420 W Radial Saw Machine is designed for the strait or angular cutting operations of the large size of materials made of PVC, teflon, bakelite or wood. RYK 420 W allows straight and angular cuttings by means of the pivoting and tilting head
SCM 420 L4-SCM 420 L7
SCM 420 L4 and SCM 420 L7 are servo controlled serial cutting machines designed for the strait or angular cutting operations of the large size of PVC or aluminium materials in manual or automatic modes by means of Ø 420 mm of saw blade.
SDT 275
Ideal for the cutting operations of bars, profiles and steel reinforcements for PVC windows
SDT 280
Semi-automatic, linear way band saw machine which is constructed of heavy gauge steel frame and grinded pillars provide a high degree of accuracy when cutting. It makes the cutting hydraulically. For the next cut, the bundled material is fed manually until it touches the length stop and the cutting is repeated. Ideal for the cutting operations of multi-cutting backing sheets mounted on solid bars, profiles and reinforcements for PVC windows
SK 500
SK 500 is designed for the strait cutting operations of the large size of profiles made of PVC and aluminium by means of Ø500 mm of saw blade at 90°. It is ideal for the serial and precise slicing and vertical drilling operations
SK 500 D
SK 500 D is designed for the strait cutting and vertical drilling operations of the large size of profiles made of PVC and aluminium by means of Ø500 mm of saw blade at 90°. It is ideal for the serial and precise slicing and drilling operations. Vertical Drilling Unit is a servo-controlled and positioned on the SK 500 D automatic achine. It is designed for single or multiple 90° vertical drilling and cutting in PVC and aluminium profiles.
SKN 300-301-600
It is computerized length stop which helps to cut the glazing bead profiles specially in the required measurements precisely
SM 201 SD
Used for screwing of reinforcement steel and drilling montage drills on the PVC door and window profiles fast and precisely The PVC profile with the reinforcement steel inserted is manually driven into the screwing unit table and the screwing and drilling processes are started with the pedal respectively. Profile forward movement is done manually until the screwing and drilling processes are completed
SM 201
Used for screwing of reinforcement steel on the PVC door and window profiles fast and precisely The PVC profile with the reinforcement steel inserted is manually driven into the screwing unit table and the screwing process is started with the pedal. Profile forward movement is done manually until the screwing process is completed.
SM 206
This machine is used to screw reinforcement steel sheet to PVC door and window profiles precisely and fast. PVC profiles are fed manually into the screwing unit. Double head screwing units automatically complete the screwing process according to the dimensions entered on the operator panel. After the screwing process, the PVC profiles are automatically taken to the outfeed stand and arranged one after the other
ST 264
It is an ideal milling machine used to open water drain channels on PVC profiles in two or three axes, at different angles and heights
TK 503
This machine is ideal for the single corner welding of PVC profiles between 30°- 180°.
TK 505
This machine is ideal for the single corner welding of PVC profiles between 30°- 180°
VCE 1570
It is an industrial product that enables the steel, aluminium and plastic shavings arise from the cutting process in cutting machines to be collected in the storage unit by vacuuming from the working environment.
VCE 3500
VCE 3500 is an industrial product that enables the PVC shavings arise from the cutting process in cutting machines to be collected in the storage unit by vacuuming from the working environment.
VCE 4000
KP 180 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminium profiles. The machine works according to the hydraulic crimping system.
VK 420
VK 420 is designed for the precise V cutting, arrow cutting and 90° end notching operations with minimal off cut size on PVC and aluminium profiles
VP 1000
It is used to transport and store cut door and window profiles between workstations
VP 2000
It is a two-sided trolley which is used to transport and store cut door and window profiles between workstations
WAS 1000
It is used to transport glass-fitted frames to assembly stations
WB 4000
Height and width adjustable work bench for workshops and general purpose use
WGM 202
After the welding process, protrusions occur at the gasket joints at the corners of the PVC frame, sash and door profiles. This causes various problems in glass installation. With this machine, the end surfaces of the gaskets are milled before welding and by ensuring a smooth connection at the corners, protruding gasket joining problems are eliminated